Water leakage due to the welding defect and improvement to reach 1-MW beam operation in the mercury target of J-PARC

ABSTRACT

Neutron flux per pulse reached world record at neutron source in Japan Proton Accelerator Research Complex (J-PARC). In the J-PARC, mercury target system is used as a spallation neutron source. A target vessel has a multi-walled protection system that comprises a mercury vessel enclosed with a double-walled water shroud. This is to prevent the leakage of the mercury outside the target vessel. The multi-walled structure needed to be complicated with a lot of welding lines. However, during the operation, we faced an unscheduled shutdown due to water leakage to the intermediate layer between the mercury vessel and water shroud. An investigation on the cause of the leakage was carried out. It is deduced that the leakage path was formed due to the crack propagation from welding defects that are caused by the complicated multi-walled structure. The crack propagation is attributed to the repeated stress by pressure waves generated in the mercury target. Based on the investigation results, the design was improved to remove the welding line on the complicated structure and to realize the stable operation with 1 MW proton beam, which is the final design value of the neutron source in J-PARC.     

基于普吕克直线的多线结构光视觉传感器标定方法

针对多线结构光系统的快速标定,提出了一种基于普吕克直线的标定方法。传统的线结构光标定方法大多以单点的形式进行提取和坐标系转换,从而获得平面方程。然而单点数量较多会导致操作复杂,不适用于多线结构光的标定。为了解决这个问题,提出了一种新的标定方法,该方法在标定过程中全部采用普吕克矩阵的形式,而不是直接使用点特征。该方法有利于在摄像机坐标系下快速准确地获得光平面方程。同时设计了一种与该方法相对应的用于标定多线结构光的平面标定靶标。为了将一般直线转换为普吕克直线,将图像平面维度延展,定义了一个新的图像空间。为了对普吕克直线的坐标系进行转换,重新表达了基于普吕克直线的透视投影模型。基于普吕克空间中直线与平面的性质,对多条结构光线的普吕克矩阵进行合并即可高效地构造出线性的矩阵方程,从而进一步拟合出结构光平面方程。实验验证了所提方法并证明了校准精度的显著提高,当测试距离为1.8 m时,测量得到的三维点的RMS误差在0.08 mm之内。     

Indirect adaptive control of nonlinear system via dynamic multilayer neural networks with multi‐time scales

This paper deals with adaptive nonlinear identification and trajectory tracking problem via dynamic multilayer neural network with different time scales. By means of a Lyapunov‐like analysis, we determine stability conditions for the on‐line identification. Then, a sliding mode controller is designed for trajectory tracking with consideration of the modeling error and disturbance. The main contributions of the paper lie in the following aspects. First, we extend our prior identification results of single‐layer dynamic neural networks with multi‐time scales to those of multilayer case. Second, the e‐modification in standard use in adaptive control is introduced in the on‐line update laws to guarantee bounded weights and bounded identification errors. Third, the potential singularity problem in controller design is solved by using new update laws for the NN weights so that the control signal is guaranteed bounded. The stability of proposed controller is proved by using Lyapunov function. Simulation results demonstrate the effectiveness of the proposed algorithm. Copyright © 2014 John Wiley & Sons, Ltd.     

“聚龙一号”装置四层圆盘锥磁绝缘传输线的三维粒子模拟研究

介绍了"聚龙一号"中四层圆盘锥磁绝缘传输线(MITL)的基本理论。在CPIPIC平台上,采用非均匀网格和周期性对称边界条件,建立了"聚龙一号"的四层圆盘锥MITL的三维粒子模拟模型。设置相应的参数并用并行算法模拟得到了该器件中各层在绝缘堆上和MITL中间位置的电流和汇流后的电流,并与理论和实验数据进行相互对比验证。模拟结果表明整个器件在达到磁绝缘状态后具有很高的传输效率,并与实验结果相互验证,为以后进一步的研究提供了保证。     

汽车总装线上远程激光焊接能量评估

通过分析激光源的类型和结构,建立参数数据库,并结合机器人运动的动力学分析,本研究提出了汽车总装线上远程激光焊接(RLW)的能量评估模型。通过对简单焊件进行焊接实验,将传统激光焊接和远程激光焊接进行了对比,结果发现,焊接过程中机器人运动能量逐渐减少,而激光能量逐渐增加。处理时间和激光功率是影响远程焊接能源效率的主要因素。     

ECISER: Efficient Clip-art Image SEgmentation by Re-rasterization

Clip-art image segmentation is widely used as an essential step to solve many vision problems such as colorization and vectorization. Many of these applications not only demand accurate segmentation results, but also have little tolerance for time cost, which leads to the main challenge of this kind of segmentation. However, most existing segmentation techniques are found not sufficient for this purpose due to either their high computation cost or low accuracy. To address such issues, we propose a novel segmentation approach, ECISER, which is well-suited in this context. The basic idea of ECISER is to take advantage of the particular nature of cartoon images and connect image segmentation with aliased rasterization. Based on such relationship, a clip-art image can be quickly segmented into regions by re-rasterization of the original image and several other computationally efficient techniques developed in this paper. Experimental results show that our method achieves dramatic computational speedups over the current state-of-the-art approaches, while preserving almost the same quality of results.     

超(特)高压线路弹压式钩型接地线的研制

输电线路停电检修时,一项重要保护措施就是挂设接地线,以保证检修人员在检修过程中免遭触电伤害。而比较常见的接地线在使用过程中存在一定的困难和安全隐患,特别是在超(特)高压输电线路上,尤为明显,而研制的弹压式钩型接地线在挂设、拆除过程中简单方便、工作效率较高、安全性大大提高。     

A novel fast distance relay for series compensated transmission lines

This paper presents a fast distance relay for series compensated transmission lines based on the R–L differential-equation algorithm using the theory of equal transfer process of transmission lines. The measuring distances based on the proposed algorithm can fast approach the actual value of fault distance when a fault occurs in front of the series capacitor. When a fault occurs behind of the series capacitor, the fault loop, including the series capacitor, does not match the R–L transmission line model, so the measuring distances fluctuate severely. Based on this, the relative position of the fault with respect to the series capacitor can be judged effectively according to the fluctuation range of the measuring distances, and the accurate fault location can be obtained fast. A variety of PSCAD/EMTDC simulation tests show that the new relay has fast operating speed and high accuracy when applied to the long series compensated transmission lines.     

A new wavelet based fault detection,classification and location in transmission lines

This paper deals with the application of wavelet transforms for the detection, classification and location of faults on transmission lines. A Global Positioning System clock is used to synchronize sampling of voltage and current signals at both the ends of the transmission line. The detail coefficients of current signals of both the ends are utilized to calculate fault indices. These fault indices are compared with threshold values to detect and classify the faults. Artificial Neural Networks are employed to locate the fault, which make use of approximate decompositions of the voltages and currents of local end. The proposed algorithm is tested successfully for different locations and types of faults.